§ 73.20. General performance objective and requirements.
409 words·~2 min read·
/us/cfr/t10/s§ 73.20·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)In addition to any other requirements of this part, each licensee who is authorized to operate a fuel reprocessing plant pursuant to part 50 of this chapter; possesses or uses formula quantities of strategic special nuclear material at any site or contiguous sites subject to control by the licensee; is authorized to transport or deliver to a carrier for transportation pursuant to part 70 of this chapter formula quantities of strategic special nuclear material; takes delivery of formula quantities of strategic special nuclear material free on board (f.o.b.) the point at which it is delivered to a carrier for transportation; or imports or exports formula quantities of strategic special nuclear material, shall establish and maintain or make arrangements for a physical protection system which will have as its objective to provide high assurance that activities involving special nuclear material are not inimical to the common defense and security, and do not constitute an unreasonable risk to the public health and safety. The physical protection system shall be designed to protect against the design basis threats of theft or diversion of strategic special nuclear material and radiological sabotage as stated in § 73.1(a).
(b)To achieve the general performance objective of paragraph
(a)of this section a licensee shall establish and maintain, or arrange for, a physical protection system that:
(1)Provides the performance capabilities described in § 73.25 for in-transit protection or in § 73.45 for fixed site protection unless otherwise authorized by the Commission;
(2)Is designed with sufficient redundancy and diversity to ensure maintenance of the capabilities described in §§ 73.25 and 73.45;
(3)Includes a safeguards contingency capability that can meet the criteria in appendix C to this part “Licensee Safeguards Contingency Plans;” and
(4)Includes a testing and maintenance program to assure control over all activities and devices affecting the effectiveness, reliability, and availability of the physical protection system, including a demonstration that any defects of such activities and devices will be promptly detected and corrected for the total period of time they are required as a part of the physical protection system.
(c)Each licensee subject to the requirements of paragraphs
(a)and
(b)of this section shall establish, maintain, and follow NRC-approved safeguards physical protection and safeguards contingency plans that describe how the licensee will comply with the requirements of paragraphs
(a)and
(b)of this section. [44 FR 68188, Nov. 28, 1979, as amended at 57 FR 33430, July 29, 1992]
Connections3 cite this
Cited by 3 sections
Citation graph
cites case law
§ 73.20
General performance objective and requirements.
Fed. Reg.×3
Cites 0Cited by 3 across 1 source